Overview of Shanghai telescopic belt conveyor

The telescopic belt conveyor (also known as the telescopic loading machine) can be freely extended and retracted in the length direction, and the length of the conveyor can be controlled at any time. It can operate in both directions to transport materials and can be used in conjunction with other conveying equipment and material sorting systems to achieve automated production of material inbound and outbound or vehicle loading and unloading. It has been widely used in various industries.

1. Working principle

The use of the Shanghai telescopic belt conveyor has shortened the distance for manual back and forth material handling, reduced the loading and unloading time of goods, lowered labor intensity, minimized damage to goods, lowered loading and unloading costs, and improved work efficiency. The telescopic belt conveyor was originally used in logistics and express delivery, as well as the tobacco industry.

2. Scope of application

The positioning conveyor of the telescopic belt conveyor is mainly suitable for loading and unloading bagged goods weighing around 10-60 kilograms. The functional characteristics of the telescopic belt conveyor

1. This conveyor only requires 2 people to move freely to different work locations.

2. Push directly into the interior of the carriage and conduct operations up to a depth of about 10 meters.

3. When operating this conveyor, it only requires manual close range dragging of goods to complete the task. It can load and unload goods in a forward direction and in a reverse direction, with a loading and unloading efficiency of about 30 pieces of goods per minute.

4. According to the homework requirements, the conveyor operation position can be adjusted in multiple directions, using a unique mechanical arm hydraulic device, which can be raised up to 4 meters and lowered to 2 meters, solving problems such as difficult stacking of heavy goods.

3. Instructions for use

Step 1: Move the conveyor to the loading location; Step 2: Move the conveyor to the interior of the carriage; Step 3: Connect the power supply, turn on the switch for operation, the side switch is the reverse switch, the front button is the start switch, the red light is the power indicator light, and the display is the counting display device (there is a small button on it to reset the count to zero); Step 4: According to the homework requirements, the height of the machine head can be adjusted through the hydraulic device. Pull the hydraulic controller outward to raise the machine head, and pull it inward to lower the machine head. Attention: When descending, the controller should be pulled slowly; Step 5: After completing the homework, unplug the power, turn off the switch, and then move it to the designated location for placement.